Plasson® Adult Drinker
4.67 / 5.0
(3) 3 total reviews
Couldn't load pickup availability
Woohoo! You've Got a Free Gift!
You've unlocked a FREE pair of FIVE ROCK Poplin Coveralls with your purchase of a Bekina Boot. Just pick your size & add to your cart.

-
Vendor:
SKU: 2706504.33 / 5.0
(12) 12 total reviews
Regular price $50 99Sale price $50 99Unit price / perIn stock -
Vendor:
SKU: 270653/
(0) total reviews
Regular price $4 02Sale price $4 02Unit price / perIn stock -
Vendor:
SKU: 2729895.0 / 5.0
(1) 1 total reviews
Regular price From $119 99Sale price From $119 99Unit price / perIn stock -
Vendor:
SKU: 2701204.0 / 5.0
(16) 16 total reviews
Regular price $3 70Sale price $3 70Unit price / perIn stock -
Vendor:
SKU: 2700804.8 / 5.0
(10) 10 total reviews
Regular price $12 99Sale price $12 99Unit price / perIn stock
More about Plasson® Adult Drinker
Made of high-impact plastic to withstand the rigors of daily use, the Plasson Adult Drinker provides a constant supply of fresh water for large adult turkeys, ducks or geese. The large lip design eliminates water spills, keeping the litter dry. The breeder operates on low water pressure. Designed to ensure a constant water level and a dry floor, its sensitive system is activated when a bird drinks as little as 2 oz. of water. The drinker may be looped in a series for brooding. Approximately 10-12 drinkers accommodate 1,000 adult turkeys; 12-14 drinkers per 1,000 turkeys in a warm climate. Includes a 10' hose and barbs. Additional parts are available.
Instructions for Use
- Fill ballast bottle 1/2 to 3/4 full of water and antifreeze. This will help prevent freezing during cold weather.
- Screw the bottle hanger onto the ballast bottle.
- Place bell over the hanger with the hanger coming through the two side holes on the bell.
- Screw mechanism assembly into center of bell.
- Hook bottle hanger onto the tabs of the mechanism assembly.
- Screw one of the unions onto the mechanism cap.
- Attach hose to union.
- The white piece on the mechanism assembly that was screwed into the bell (Step 4) is called the water level adjuster. Once the water reaches the desired level, tighten the black locking collars to keep this level from changing.
Notes: If wet litter develops around the drinker, check the following
- Is the water pressure too high?
- Is the water level in the bell trough too high?
- Are the drinkers raised high enough?
Pair with a regulator - QC Part #120161 or QC Part #122077 for best results when attaching a Plasson Bell Drinker directly to a water source.
They work so well. Wished I would’ve bought them sooner plan to buy more soon. Good good experience working with QC
Through all other waters away. Bit the bullet and spend the money for this waterer.
The drinker works great. However, the 1/4" line does not match the 3/4" Garden Hose. I had read a review, before I ordered, about a needed coupling. I called customer service concerning this and they said I would not need the coupling but said I would need a $50.00 regulator. After receiving my order the regulator had 3/4" for a garden hose and the other side was a 3/8". I went to Lowes and had to buy the proper connectors to reduce down to the 1/4". After all that I could not get the regulator to work. I adjusted the regulator all the way in and all the way out and it would not allow the water to run through it. I removed the regulator from the system which meant another trip to Lowes for more couplings. The system works fine without the regulator. I also added a quick disconnect from the garden hose to be able to mow around the chicken coop. QC was great about taking back the regulator since it was something I was talked into purchasing.
They work so well. Wished I would’ve bought them sooner plan to buy more soon. Good good experience working with QC
Through all other waters away. Bit the bullet and spend the money for this waterer.
The drinker works great. However, the 1/4" line does not match the 3/4" Garden Hose. I had read a review, before I ordered, about a needed coupling. I called customer service concerning this and they said I would not need the coupling but said I would need a $50.00 regulator. After receiving my order the regulator had 3/4" for a garden hose and the other side was a 3/8". I went to Lowes and had to buy the proper connectors to reduce down to the 1/4". After all that I could not get the regulator to work. I adjusted the regulator all the way in and all the way out and it would not allow the water to run through it. I removed the regulator from the system which meant another trip to Lowes for more couplings. The system works fine without the regulator. I also added a quick disconnect from the garden hose to be able to mow around the chicken coop. QC was great about taking back the regulator since it was something I was talked into purchasing.
They work so well. Wished I would’ve bought them sooner plan to buy more soon. Good good experience working with QC
Through all other waters away. Bit the bullet and spend the money for this waterer.
The drinker works great. However, the 1/4" line does not match the 3/4" Garden Hose. I had read a review, before I ordered, about a needed coupling. I called customer service concerning this and they said I would not need the coupling but said I would need a $50.00 regulator. After receiving my order the regulator had 3/4" for a garden hose and the other side was a 3/8". I went to Lowes and had to buy the proper connectors to reduce down to the 1/4". After all that I could not get the regulator to work. I adjusted the regulator all the way in and all the way out and it would not allow the water to run through it. I removed the regulator from the system which meant another trip to Lowes for more couplings. The system works fine without the regulator. I also added a quick disconnect from the garden hose to be able to mow around the chicken coop. QC was great about taking back the regulator since it was something I was talked into purchasing.