LB ® Outdoor Mounting Kit For Guardian® AW060/AD060 Heaters

(09810) Install your LB White® Guardian® AW060 or AD060 heater outside with the help of this Outdoor Mounting Kit. By installing your heater outdoors, you allow fresh, outside air to be drawn into the heater for combustion. This means cleaner combustion and better inside air quality.

When installed outdoors, Guardian heaters and their piping are not exposed to the corrosive barn environment, minimizing component damage from dust and moisture accumulation. This means you reap lower maintenance costs. You also will get lower installation costs and fewer replacement costs.

Gain space inside barns by installing outside with this mounting kit. Since heater maintenance is performed outside, biosesecurity concerns are decreased.

Includes all of the necessary hardware, instructions, and templates required to install your new heater outside, or relocate an existing indoor mounted Guardian heater outside.

Tools & Materials Required

• Standard screwdriver
• 1/4" nut driver
• Electric drill
• 1/8" drill bit
• 1/4" drill bit
• Level
• Reciprocating saw or jigsaw
• Ratchet with 9/16" socket
• 9/16" wrench or adjustable wrench
• Pencil or marker
• Ruler or tape measure
• Sealant caulk
• Appropriate support material (if needed)

Does not work with Guardian Pilot Light Heaters.

Works With The Following Guardian Heaters

• QC Supply Part #20180 - 30-60 BTU Propane Hot Surface Ignition Heater - AW060
• QC Supply Part #20182 - 30-60 BTU Natural Gas Hot Surface Ignition Heater - AW060
• QC Supply Part #20010 - 30-60 BTU Propane Direct Surface Ignition Heater - AD060
• QC Supply Part #20011 - 30-60 BTU Natural Gas Direct Surface Ignition Heater - AD060