The Scorpion® III Still Has the Best Heating Pattern of Any Heat Lamp!
The Scorpion® III heats two litters with only one bulb. Unlike other heat lamps with a circular heating pattern, the Scorpion® III provides a rectangular heating pattern with no hot spots. When mounted on the divider panel, the Scorpion® III will not heat the sow, preventing burned udders. The sow is more comfortable, resulting in increased milk production.
The three-way switch provides precise comfort control and reduces energy consumption to less than 63 watts per side during warmer weather or as piglets get older. The easy-mount clamping system attaches securely to the divider in seconds.
- 115 volt
- Three wire
- 9’ grounded cord for added safety
Bulbs are not included, see QC #260500.
Note: For use with 1 1/8" metal divider panels.
|Manufacturer Part Number||HHLF250/C|
Not what I expected at all. The construction is horrible, very flimsy. I have to put the lamp 18 inches off the ground just to keep me piglets some what warm, so the area that the lamp covers is very small. I'd rather use the round heat lamp and bulb way cheaper and has A wider heating area.
Good, not great. Switch housing could be redesigned for longer life.
We use these for new litters born in winter and when they work, they are great. Unfortunately, the switch housing is not super durable and so we usually have to replace the lamps every 2 years or so...
I use these heaters in the garage for my dogs. They work great with goats and any other type livestock. On "low" it will heat an area 4 X 4 to a temp of 80 degrees. I now have 10 heaters and there is no other product that can come close to their performance.
You might also like:
$25.99 As low as: $24.99
QC Part #: 260527A