GearWrench® 7-Piece Ratcheting Combination Wrench Set - SAE
This 7-piece SAE Ratcheting Combination Wrench Set needs as little as 5° to move a fastener. A standard 12-point box end wrench needs 30° or 6 times as much room. The thin head and shank allow the GearWrench® into the tightest areas.
Extremely strong, they meet or exceed ANSI, DIN and federal torque specifications for standard professional combination wrenches. Long bolts and threaded rods are not a problem. The ratcheting head allows the wrench to travel the length of the threads without removing the box end from the fastener.
The GearWrench® is a speed wrench. It moves a fastener with the speed and ease of a fine tooth ratchet. The Surface Drive® box end configuration virtually eliminates the rounding of fasteners. By moving the contact points of the wrench back from the edge of the fastener, the area of flat contact is expanded, distributing the load over a wide area.
- 5° precision movement ratcheting GearWrench® on 3/8" through 3/4", 6° on 5/16"
- GearWrench® meets or exceeds ANSI, DIN and federal torque specifications
- All metal construction
- Mirror finish
- Fully hardened
Contains: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" and 3/4"