Skip to the beginning of the images gallery

Dirt Killer IDK Series Nozzle

Name: Dirt Killer IDK Series Nozzle
Brand: Dirt Killer
SKU: GR717
Price: 139.72 USD
Availability: InStock
Rating: 100 (2 reviews)

Rating:

100% of 100

Grouped product items
	Dirt Killer IDK Series Nozzle - Size 4.5 - Green $139.72 QC Part # 110031 In stock QC Part # 110031 In stock
	Dirt Killer IDK Series Nozzle - Size 5.5 - Black $139.72 QC Part # 110048 In stock QC Part # 110048 In stock
	Dirt Killer IDK Series Nozzle - Size 7 - Blue $139.72 QC Part # 110034 In stock QC Part # 110034 In stock
	Dirt Killer IDK Series Nozzle - Size 8 - Red $139.72 QC Part # 110036 In stock QC Part # 110036 In stock
	Dirt Killer IDK Series Nozzle - Size 10 - Brown $139.72 QC Part # 110037 In stock QC Part # 110037 In stock

The Impact of a 0° Nozzle with a 25° Fan!

Blast dirt, grime, slime, mold, mildew and more with the Dirt Killer IDK Series Nozzle. This nozzle creates a whirlwind of water droplets so powerful that embedded dirt is blown away, saving you chemicals, water, time and money

The rotating turbine delivers the punch of a 0° nozzle with a 25° fan, creating 10 times the cleaning impact of a standard flat tip nozzles. This will cut cleaning time in half. The Dirt Killer IDK Series Nozzles give a less powerful machine the impact of a larger, more powerful pressure washer.

Exclusive Features:

Spins slower
Produces greater impact
Used for water blasting and heavy-duty cleaning
4,700 PSI
180° F Maximum Temperature
1/4" FPT

Available in 5 Sizes:

#110031 — 4.5 (Green)
#110048 — 5.5 (Black)
#110034 — 7.0 (Blue)
#110036 — 8.0 (Red)
#110037 — 10 (Brown)

Common Applications: Removal of concrete from forms, removal of mud and clay from equipment, cleaning of hog confinements and farrowing crates.

Universal Nozzle Sizing Chart:

	PSI
Nozzle Size	1000	1200	1500	2000	2500	3000	4000	5000
3.5	1.70	1.90	2.17	2.45	2.73	3.05	3.32	3.50
4.0	2.00	2.20	2.50	2.80	3.10	3.50	3.80	4.00
4.5	2.20	2.40	2.80	3.00	3.60	3.90	4.30	4.50
5.0	2.50	2.80	3.10	3.40	4.00	4.40	4.70	5.00
5.5	2.80	3.00	3.40	3.80	4.40	4.80	5.20	5.50
6.0	3.00	3.20	3.70	4.20	4.80	5.20	5.70	6.00
6.5	3.30	3.60	4.00	4.60	5.20	5.70	6.00	6.50
7.0	3.50	3.80	4.30	5.00	5.60	6.10	6.60	7.00
7.5	3.80	4.10	4.60	5.30	6.00	6.50	7.00	7.50
8.0	4.00	4.40	5.00	5.60	6.20	7.00	7.50	8.00
8.5	4.30	4.60	5.30	6.00	6.70	7.40	8.00	8.50
9.0	4.50	5.00	5.50	6.40	7.10	7.80	8.50	9.00
9.5	4.80	5.20	5.80	6.80	7.60	8.30	9.00	9.50
10.0	5.00	5.40	6.10	7.00	8.00	8.70	9.40	10.00
11.0	5.50	5.80	6.70	8.75	9.00	9.55	10.30	11.00
12.0	6.00	6.40	7.30	8.40	9.50	10.40	11.20	12.00
*All units are in GPM

Dirt Killer Nozzle Maintenance: Sand, grit or rust particles in water further reduce the life expectancy of a Dirt Killer Nozzle. Follow these steps to ensure an extended life for your Dirt Killer Nozzle.

If the nozzle slows, emits a bad pattern or stops, cease using the nozzle immediately. Failure to do so may cause turbine damage. Disassemble the nozzle and clean nozzle and nozzle shaft.
Filter inlet water before the pump and use a high pressure filter.
When starting, point nozzle down to prevent ceramic tip damage.
Keep water temperatures below 180° F
Do not trigger on and off. This causes excessive wear.

Dirt Killer Nozzle Rebuilding Instructions:

Remove cover and unscrew inlet adapter.
Remove turbine nozzle and check for clogs.
If clogged, clear turbine nozzle and reassemble.
To rebuild entire nozzle, remove all contents. Place small O-ring on tip of seat and smear with 272 Loctite and press set into tip of nozzle.
Change large O-ring on inlet adapter.
Drop turbine nozzle into nozzle body and screw inlet adapter on. Back on nozzle turbine should not be centered.
Replace cover.