(9F30213) Motor for HD60, HD75, HDS60 and HDS75 Modine® Hot Dawg® Heaters.
- 1/12 HP
- 115 Volt
- 1600 RPM
- Weight: 7 lbs.
Works With the Following Models:
- HD60AS — Spark Ignition
- HDS60AS — Spark Ignition
- HD60AH — Hot Surface Ignition
- HD75AS — Spark Ignition
- HDS75AS — Spark Ignition
- HD75AH — Hot Surface Ignition
|Manufacturer Part Number||9F30213|
Motor is quiet, but the shaft is too short. Causes the fan blades to be too close to the motor studs. Had to track down some shaft sleeves to bring the blades away from the motor.
Fit perfect and works great.
Old motor failed due to slightly out of balance fan, front oilite bearing WAY too small, went egg shape in one year, fan blade mounted way out on shaft from Modine . Series of really dumb moves by them. hint: get a good engineer.
Was pleasantly surprised..much better motor-- shaft steps up at bearing (bigger bearing) ; put blade on as near motor as it would go, all ok .Great service , fast, but better motor is the AA++. Go QC , great price too.
Exact fit replacement motor for hot dawg
Perfect replacement motor. Easy swap.
great shipping and fast
You might also like:
Price From: $577.20 - $886.60
QC Part #: 20855
Price From: $830.70 - $1,435.20
QC Part #: 20840
QC Part #: 20890
QC Part #: 20866
QC Part #: 20867