Click on image to zoom

Modine Hot Dawg® Heater Model HDS

Modine , HDS

QC Supply Part #: 20840

1 Review(s) | Add Your Review

Shipping: Standard

Availability:

$859.75 - $1,415.55

Type:
Btu:

Qty:

Modine Hot Dawg HDS garage and shop heaters offer convenience and quality at a great price. The HDS model is a separated sealed combustion, gas-fired unit heater. 80% Thermal Efficiency. The Installation and Service Manual is located on the inside of the side panel.

Description

All installation and service of these units should be performed by a qualified installation and service agency, including the use of Modine's installation and service manuals which are specifically intended for use by a qualified installation and service agency.

A High Altitude Kit is required for elevations above 2,100 ft. Please specify your exact altitude in the box provided if you require this kit. This kit ships separately from our vendor at no charge to you and should arrive 10-14 business days after we ship your heater. Heater can be installed prior to receiving this kit.

The Installation & Service Manual is located on the inside of the side panel.

NOTE: 100,000 - 125,000 BTU models do not include mounting brackets. These units feature 4 top threaded holes for mounting with 3/8" threaded rod or 3/8" eye bolts and chain.

The HDS Separated Combustion Model is Designed for Environments Where Dirt, Dust, Humidity, Fumes or Contaminants May Be Present

If you're looking for a garage heater or a shop heater, Modine Hot Dawg® Heaters offer convenience and quality at a great price.

All Hot Dawg® Models Feature:

80% Thermal Efficiency
Quiet Operation
Natural Gas or Propane
Direct Spark Ignition
Low-profile Design
Certified for Residential, Commercial and Industrial Use
Standard Power Exhaust Simplifies Side-Wall or Roof Venting
Versatile Design Allows for Right or Left Hand Controls and Installation. Gas, Electrical and Flue Connections can be Changed From One Side to the Other by Simply Flipping the Hot Dawg® Over.
Permanently-Lubricated Motor for Trouble-Free Dependability
Full 10-Year Warranty on Heat Exchanger
3" Vent (Models 30,000 - 45,000 BTU)
4" Vent (Models 60,000 - 125,000 BTU)
110 Volt
CSA Certified
MADE IN THE USA

Hot Dawg® HDS Models Also Feature:

Designed for environments where dirt, dust, humidity, fumes or other contaminants may be present
The separated combustion Hot Dawg® draws its combustion air from outside the work space, ensuring the unit always has plenty of fresh, clean air to breathe
The fresh-air supply reduces common concerns about dusty, dirty or humid applications; providing greater durability and reduced maintenance
Drawing combustion air from the outside increases overall heating efficiency
External gas connections
Greater CFM's than standard Hot Dawg® model
All HDS models ship ready-to-go

Unit	Model #	BTU (Input)	BTU (Output)	NG/LP	Application	Dimensions L x W x H	Wgt.
HDS30A	HDS30AS0121	30,000	24,000	Propane	1-1 1/2 Car Garage	26.8" x 22" x 12.2"	68 lbs. (UPS Shippable)
HDS30A	HDS30AS0111	30,000	24,000	Natural Gas	1-1 1/2 Car Garage	26.8" x 22" x 12.2"	68 lbs. (UPS Shippable)
HDS45A	HDS45AS0121	45,000	36,000	Propane	2-2 1/2 Car Garage	26.8" x 22" x 12.2"	78 lbs. (UPS Shippable)
HDS45A	HDS45AS0111	45,000	36,000	Natural Gas	2-2 1/2 Car Garage	26.8" x 22" x 12.2"	78 lbs. (UPS Shippable)
HDS60A	HDS60AS0121	60,000	48,000	Propane	3-3 1/2 Car Garage	26.8" x 25" x 18"	85 lbs. (UPS Shippable)
HDS60A	HDS60AS0111	60,000	48,000	Natural Gas	3-3 1/2 Car Garage	26.8" x 25" x 18"	85 lbs. (UPS Shippable)
HDS75A	HDS75AS0121	75,000	60,000	Propane	Shop-Large Garage	26.8" x 25" x 18"	91 lbs. (UPS Shippable)
HDS75A	HDS75AS0111	75,000	60,000	Natural Gas	Shop-Large Garage	26.8" x 25" x 18"	91 lbs. (UPS Shippable)
HDS100A	HDS100AS0121	100,000	80,000	Propane	Shop-Large Garage	35.5" x 31" x 20.5"	125 lbs. (Freight Only)
HDS100A	HDS100AS0111	100,000	80,000	Natural Gas	Shop-Large Garage	35.5" x 31" x 20.5"	125 lbs. (Freight Only)
HDS125A	HDS125AS0121	125,000	100,000	Propane	Shop-Large Garage	35.5" x 31" x 20.5"	125 lbs. (Freight Only)
HDS125A	HDS125AS0111	125,000	100,000	Natural Gas	Shop-Large Garage	35.5" x 31" x 20.5"	125 lbs. (Freight Only)

Additional Specifications:

Unit	CFM	Air Temp Rise	Mounting Height (Max ft.)	Heat Throw (ft.)	Amps	Vent Size (in.)
HDS30A	505	44°	10'	25'	3.7	3"
HDS30A	505	44°	10'	25'	3.7	3"
HDS45A	720	46°	10'	27'	3.7	3"
HDS45A	720	46°	10'	27'	3.7	3"
HDS60A	990	45°	12'	36'	2.5	4"
HDS60A	990	45°	12'	36'	2.5	4"
HDS75A	1,160	48°	14'	38'	2.5	4"
HDS75A	1,160	48°	14'	38'	2.5	4"
HDS100A	1,490	50°	12'	42'	4.7	4"
HDS100A	1,490	50°	12'	42'	4.7	4"
HDS125A	1,980	47°	16'	56'	4.2	4"
HDS125A	1,980	47°	16'	56'	4.2	4"

Commonly Asked Questions:

Q: Does the Hot Dawg® vent to the outside of the garage?
A: Yes, it is supplied with a factory-installed venting system that allows for either vertical venting through the roof or horizontal venting through a side wall. Venting components must be purchased separately and installation should be performed by a licensed contractor.

Q: What size gas connection does the Hot Dawg® have?
A: 1/2"

Q: How is the Hot Dawg® mounted in a garage?
A: Included with 30,000 - 75,000 BTU models are angled hanging brackets designed for 3/8" bolts, lag screws, or rods. This allows a snug-to-ceiling installation with 1" clearance, or the unit can be suspended with threaded rods. 100,000 - 125,000 BTU models do not include mounting brackets. These units can be mounted with 3/8" threaded rod or 3/8" eye bolts and chain.

Q: Can the unit be flipped to allow left-or-right hand access to the controls?
A: Yes, the 30,000 - 75,000 BTU units can be flipped. The 100,000 - 125,000 units cannot be flipped.

Q: Can the louvers be moved?
A: Yes, the louvers are fully adjustable to direct heat where it is needed.

Q: Is the Hot Dawg® Heater covered by a warranty?
A: Yes, the residential warranty is two years on materials and workmanship on all parts except the heat exchanger, which is ten years on materials and workmanship.

Q: Can the Hot Dawg® operate at high altitudes?
A: Yes, a High Altitude Kit is required for elevations above 2,100 ft. Please specify your exact altitude in the box provided if you require this kit. This kit ships separately from our vendor at no charge to you and should arrive in 10-14 business days.

All installation and service of these Modine Hot Dawg® garage and shop heaters should be performed by a qualified installation and service agency.

When ordering parts for Modine Hot Dawg® Heaters please have the following ready: Model number, serial number, power code number and control code (these can be found on the serial plate on the side of the unit).

The Installation & Service Manual is located on the inside of the side panel.

Brand	Modine
Manufacturer Part Number	HDS

Reviews

Customer Reviews

So happy! Review by Krasuz

This is the best investment we have ever made for our workshop. It works great and at a third of the price we had been quoted by our local plumbing and heating guy installed. Thank you QC Supply from Canada.

(Posted on 3/2/13)

Add your review to this product