Stainless Steel Nipple for Poultry Drinkers.
- Threaded Body
- Push-up Style
- Excellent for Layers
- 1/8" Thread
- Vertical mounting ONLY. Will leak if mounted horizontally.
This nipple is designed for use in square PVC tubing systems. Assemble by screwing nipple into tubing. Needs a .90 ml (metric) hole to screw into. Need 11/32" drill bit (sold separately) to install.
**For gravity fed water systems, we recommend using Item #420006 (Poly/Stainless Steel 360° Nipple) or #420011 (Push-In Style Nipple).
Manufacturer Part Number 420001 Animal Poultry & Gamebird
- Great product! Great price! Review by Tons of Fun
These are a no frill, no fuss, no mess, nipples. I am using in them in pvc pipe(s) to use as waterers for my rabbit and chickens. Yes I agree, there are no instructions, but it doesn't take a rocket scientist to figure out how to use them. Once placed into the pvc hole that I created, it was a tight fit, with no need for silicone or gaskets of any type. Also, if fitted properly, they will NOT come apart. I highly recommend them and they should last longer than the animals! LOL!!
(Posted on 12/12/12)
- Poor Design Review by lhorstman
My order came in a bag with no instructions. It's very hard to install and not drop out the pieces. It took a few tries before I got it set up right. The floaty part and weight should not come out on their own! This is such a pain to deal with. If they were fixed onto the nipple, it would make much more sense. I set up a watering system to collect water in a rain barrel to water my chickens. I then ran a PVC pipe in the chicken area and attached the nipples. They learned pretty quick to drink from the nipples. The next morning I went to check on things. They had pecked the nipples so hard that all of the pieces had come out the top of the nipple and fell into the PVC pipe. All of my water that I had collected into the barrel drained out. This product is not what I was hoping for. I would not buy these type of nipples.
(Posted on 5/15/12)
- Poor product Review by Medievil1
First of all the nipples come in a bag un-assembled with no instructions on how to put them together. Second, there is no rubber washer or anything to seal off the water so I had to use silicone. Third there isn't anything to hold, what I call the valve and the weight, from coming out when the chickens peck it. So when they peck it the weight pops out then the nipple and all of your water runs out. I do not recommend this product. I am returning mine.
(Posted on 4/14/12)
- quality, simple, no instructions, odd tap. Review by Wolfe
These use 1/8" x 28-tpi "British" standard pipe tapered(bspt) threads. I wish I would have known prior, so I could have ordered the tap in a timely manor. (1/8" US national pipe tapered (NPT) is 27-tpi, and no local stores carry bspt taps.)
Impex is a dutch company with many different nipple models but their website does not offer much info on each item other than water flow/pressure. They don't bother to explain the different options available.
Otherwise a nice item these are standard flow, push up type, 3 loose parts for easy cleaning. Listed by Impex under full grown parent stock and layer chickens.
(Posted on 3/11/12)
- Quality but beware of design Review by dc
This is a quality device but it is an assembly of parts that are not held together by anything other than gravity! The parts were delived loose in a plastic bag. Once assembled you have to be careful or the nipple will fall apart again. This makes it near impossible to use these nipples in a portable watering device. **Which was my intended use for them, therefore I rate these 1 star.
(Posted on 6/24/11)