The CP33 is an adjustable liquid injector that accurately injects a precise amount of solution over a period of time.
This versatile injector is used for:
- Chlorination or hydrogen peroxide disinfection of drinking water
- pH control of drinking water
- Fertilization of greenhouse and outdoor crops
- Chlorination and pH control of swimming pools
The advantages of the CP33's injection-volume-over-time versus strictly proportional injection are simple:
- The CP33 provides the ability to inject very small amounts into the water. This is essential when using the CP33 to disinfect drinking water, where the goal is a residual in the range of 2-4 parts per million.
- The CP33 provides the ability to dynamically adjust the injection volume. This is advantageous when using the CP33 for chlorination. It is also beneficial when fertilizing crops; if there's been a lot of rain, you increase the injection volume of liquid fertilizer or micronutrient and use less water to deliver it.
The easy to read Injection Control Panel shows you exactly how much solution you are injecting and provides a simple mechanism for making adjustments.
The CP33 runs off of water flow, and works with system flows from as low as 12 gallons per minute* to in excess of 200 gallons per minute . The CP33 only uses a portion of the overall flow for power. This limits pressure loss within the water system and also allows the treatment of very large volumes of water. In fact, the CP33 is exceptionally suited to injecting very small volumes of solution into large volumes of water!
The CP33 is used to inject disinfectants, sanitizers, fertilizers, micronutrients, biologicals, fungicides, algaecides, soaps & surfactants, and many other chemicals and solutions.
Looking to inject 1 ounce per hour, 6 gallons per hour, or some thing in between? The CP33 is the injector you are looking for! Unsure how much to inject? Click here to use our handy calculator.
Documents:
Item #
| Model
| Range of Injection Volume
| System Water Flow*
| Operating Pressure
| Inlet / Outlet
| Weight
|
120850 |
CP33 |
3 ounces-per-hour to 3 gallons-per-hour |
12 -200 GPM |
4 – 80 PSI |
¾” NHT |
8 lbs. |
120851 |
CP33 |
6 ounces-per hour to 6 gallons-per-hour |
12 -200 GPM |
4 – 80 PSI |
¾” NHT |
8 lbs. |
120852 |
CP33 |
1 ounce-per-hour to 1 gallon-per-hour |
12 -200 GPM |
4 – 80 PSI |
¾” NHT |
8 lbs. |
*Note: The CP33 will operate on water flows as low as 6 gallons per minute as long as the water flow is a constant rate. |