The Tamperproof™ EID Ear Tag has a unique design that provides the ultimate in security, usability and retention. This is a single use tag that has a hard plastic tamperproof cap with transponder numbers that are laser marked in a circular format on the edge of the tag.

HDX is a design principle where the transponder initiates the return signal to the reader/scanner/interrogator only after the end of the interrogation signal has been received and only after the storage capacitor has been fully charged in the transponder. The return signal is only sent once because on the storage capacitor is emptied once the data is sent. This electronic ear tag has proven high performance providing enhanced signal strength for maximum read distance.

The tag is constructed of a white injection molded polyurethane female with a black plastic injection molded tamperproof cap. The hard cap of the ultra tag provides the highest degree of security available. If any attempt is made to remove the male tag from the female causes the tag components to break thus rendering them useless.

Application:
For proper application and to protect the transponder from damage make sure the raised portion of the Ultra Tamperproof EID tag is positioned at the front of the applicator jaw. These electronic ear tags use the same Universal Total Tagger Applicator as the visual tamperproof tags. To apply tags, remove the red blunt applicator pin and remove the black or white insert. The Ultra Retract-O-Matic may also be used to attach tag.