Tee-Jet® Nozzle Adapters are Designed to Satisfy the Evaporative Cooling Needs of Confinement Houses.
This Tee-Jet® Nozzle Body Adapter is for use with a 1/2" pipe and requires a 9.5mm (3/8") hole drilled in pipe to allow water to flow through.
- 300 PSI maximum pressure
- Requires 10 PSI at valve to open
- Threaded to accept nozzle cap (#160113)
For Nozzles, see our TeeJet® Flat Spray (#160116), Hollow Cone (#160117) and Wide Angle Flat Spray Nozzles (#160620-160622).
|Manufacturer Part Number||25775-1/2T-NYB|
You might also like:
QC Part #: 160113
QC Part #: 160104
QC Part #: 160105
QC Part #: 160106
QC Part #: 160118
QC Part #: 160119