Just Twist II Clean™ — easy to install and easy to use inline water filter from Lakos®. TwistIIClean™ removes sand and organics as the water passes through the filter element. Periodic cleaning is necessary to optimize filter performance, reduce pressure loss and prolong product life.
When the filter element looks like it is filled with debris, it should be cleaned. Flush the filter quickly and easily with a 1/4 clockwise turn at the top handle begins the reverse flushing action. In a few seconds, all debris are backwashed off of the filter element and flushed out the bottom of the Purge Exit port.
High performance backflow spin down filter with reusable SS 140 mesh (105 micron) screen offers unique backwash cleaning action without traditional ball valve. Dual threaded inlet/outlet either NTP or BSP in 3/4", 1" or 1 1/2" sizes. High flow rate and 100 PSI pressure rating for increased operating flexibility and minimum pressure loss.
- Easy to install and easy to use - just twist to clean it
- No leaks or watery messes made by other products
- Patented self-cleaning action
- No need to depressurize whole system to clean
- Easy to replace mesh filter cartridges available in many sizes
- Made in the USA
- Model #: T2C-100-140
- Connections: 1" Inlet/Outlet
- Maximum Flow Ranges: 0-39 US GPM
- Maximum Pressure: 100 PSI at 73° F
- Temperature Range: 32° F to 120° F
- Mesh Size: 140 Mesh/105 Micron Element (Black)
- Weight: 1.8 lbs.
|QC Part #||Model #||Inlet/Outlet||Purge||Total Length||Length|
(Inlet/Outlet to Purge Port)
|121119||T2C-075-100||3/4" MPT||1/2" MPT||11 3/4"||8 3/4"||6"||100 Mesh/150 Micron|
|121120||T2C-075-140||3/4" MPT||1/2" MPT||11 3/4"||8 3/4"||6"||140 Mesh/105 Micron|
|121124||T2C-100-100||1" MPT||1/2" MPT||11 3/4"||8 3/4"||6"||100 Mesh/150 Micron|
|121122||T2C-100-140||1" MPT||1/2" MPT||11 3/4"||8 3/4"||6"||140 Mesh/105 Micron|
|121125||T2C-150-100||1 1/2" MPT||3/4" MPT||15 1/4"||11 3/4"||7 1/2"||100 Mesh/150 Micron|
|121126||T2C-150-140||1 1/2" MPT||3/4" MPT||15 1/4"||11 3/4"||7 1/2"||140 Mesh/105 Micron|
|Manufacturer Part Number||132067|
Manuals & Resources
- Lakos® TwistIIClean™ Inline Water Filter Installation & Operation Guide
- Lakos® TwistIIClean™ Inline Water Filter Spec Sheet
- Lakos® TwistIIClean™ Benefits
- Lakos® Screen Element Replacement Information
I have this filters bigger brother that has been in service for about a year. It performs as advertised. Very easy to flush.
good filter, but...
Good filter, easy to clean, but red latch breaks off easily and without it filter is useless, tried tying valve in place, but this causes leaks at top, still haven't found a replacement.
very poor quality
the filter leaks form top part while twisting. got a second one and had the same issue. very disappointed. not recommended !!
Decent - but
I think this is a great sediment filter. The only issue I have with it is that you MUST install it on the outlet side of the pump/pressure tank. I really need it more for use before the pump/tank. I have a separate GE filter on the outlet side. I want to keep sand from entering the pump/tank.
Not sure of quality
The filter leaks a few drops of water a day from underneath the upper "turret". I'll give it a day or two more, and if it continues, I'll cut it out of the plumbing and send it back.
works very well
Works like they say
I have used it for a week. So far it works like they say. I am slow to install these type of thing but also slow at removing and cleaning or replacing the paper filters on my GE whole house filter. I am in hopes to gain back my time and money in a two or three years. If you like something that solves a significant problem in an ingenious way this filter fills the bill and make you wonder why filters have not always been made this way.
You might also like:
QC Part #: 121124
QC Part #: 121119
QC Part #: 121120
QC Part #: 121125
QC Part #: 121126