1-800-433-6340 or
Shopping Cart (0)

Dirt Killer IDK Series Nozzle - Size 10 - Brown

, 97410717
QC Supply Part #: 110037
Shipping: Standard
Availability: In stock
$129.99

Blow away embedded dirt with powerful water droplets.

Description

The Impact of a 0° Nozzle with a 25° Fan!

Blast dirt, grime, slime, mold, mildew and more with the Dirt Killer IDK Series Nozzle. This nozzle creates a whirlwind of water droplets so powerful that embedded dirt is blown away, saving you chemicals, water, time and money

The rotating turbine delivers the punch of a 0° nozzle with a 25° fan, creating 10 times the cleaning impact of a standard flat tip nozzles. This will cut cleaning time in half. The Dirt Killer IDK Series Nozzles give a less powerful machine the impact of a larger, more powerful pressure washer.

Exclusive Features:

  • Spins slower
  • Produces greater impact
  • Used for water blasting and heavy-duty cleaning
  • 4,700 PSI
  • 180° F Maximum Temperature
  • 1/4" FPT

Common Applications: Removal of concrete from forms, removal of mud and clay from equipment, cleaning of hog confinements and farrowing crates.

Universal Nozzle Sizing Chart:

 PSI
Nozzle Size10001200150020002500300040005000
3.5 1.70 1.90 2.17 2.45 2.73 3.05 3.32 3.50
4.0 2.00 2.20 2.50 2.80 3.10 3.50 3.80 4.00
4.5 2.20 2.40 2.80 3.00 3.60 3.90 4.30 4.50
5.0 2.50 2.80 3.10 3.40 4.00 4.40 4.70 5.00
5.5 2.80 3.00 3.40 3.80 4.40 4.80 5.20 5.50
6.0 3.00 3.20 3.70 4.20 4.80 5.20 5.70 6.00
6.5 3.30 3.60 4.00 4.60 5.20 5.70 6.00 6.50
7.0 3.50 3.80 4.30 5.00 5.60 6.10 6.60 7.00
7.5 3.80 4.10 4.60 5.30 6.00 6.50 7.00 7.50
8.0 4.00 4.40 5.00 5.60 6.20 7.00 7.50 8.00
8.5 4.30 4.60 5.30 6.00 6.70 7.40 8.00 8.50
9.0 4.50 5.00 5.50 6.40 7.10 7.80 8.50 9.00
9.5 4.80 5.20 5.80 6.80 7.60 8.30 9.00 9.50
10.0 5.00 5.40 6.10 7.00 8.00 8.70 9.40 10.00
11.0 5.50 5.80 6.70 8.75 9.00 9.55 10.30 11.00
12.0 6.00 6.40 7.30 8.40 9.50 10.40 11.20 12.00
*All units are in GPM


Dirt Killer Nozzle Maintenance: Sand, grit or rust particles in water further reduce the life expectancy of a Dirt Killer Nozzle. Follow these steps to ensure an extended life for your Dirt Killer Nozzle.

  1. If the nozzle slows, emits a bad pattern or stops, cease using the nozzle immediately. Failure to do so may cause turbine damage. Disassemble the nozzle and clean nozzle and nozzle shaft.
  2. Filter inlet water before the pump and use a high pressure filter.
  3. When starting, point nozzle down to prevent ceramic tip damage.
  4. Keep water temperatures below 180° F
  5. Do not trigger on and off. This causes excessive wear.

Dirt Killer Nozzle Rebuilding Instructions:

  1. Remove cover and unscrew inlet adapter.
  2. Remove turbine nozzle and check for clogs.
  3. If clogged, clear turbine nozzle and reassemble.
  4. To rebuild entire nozzle, remove all contents. Place small O-ring on tip of seat and smear with 272 Loctite and press set into tip of nozzle.
  5. Change large O-ring on inlet adapter.
  6. Drop turbine nozzle into nozzle body and screw inlet adapter on. Back on nozzle turbine should not be centered.
  7. Replace cover.

Available in 5 Sizes:

  • #110031 — 4.5 (Green)
  • #110048 — 5.5 (Black)
  • #110034 — 7.0 (Blue)
  • #110036 — 8.0 (Red)
  • #110037 — 10 (Brown)
Brand Dirt Killer
Manufacturer Part Number 97410717
Top

Parts

Top

Customer Reviews

Write Your Own Review

How do you rate this product?

Leave a review

* Required Fields
Top

You might also like:

Top